Clipper^® G Series^™ Fastening System

The Clipper^® G Series™ Fastening System provides constant compression, resulting in a flat, uniform splice. The staggered-leg design with four alternating leg lengths deliver additional strength and durability to the finished splice.

View Literature, Manuals & Videos

Belts from .059” to .197” (1.5mm to 5mm) thick
Minimum pulley diameter from 1.6”-3” (40 mm to 75 mm)
Stamped with AISI 316 stainless steel for demanding applications
Designed for use with PVC, PU, and PES belting
Flat, continuous top bar design eliminates belt wave and reduces the risk of dislodged fasteners
Low-profile design is conveyor component compatible
Double-staggered grip pattern offer exceptional holding power, does not degrade integrity of belt
Easy to install, ensuring a consistent 4.00 mm pitch over the entire length of the lacing

Minimum Pulley Diameter	Material Thickness		Hinge Pin Size		Belt Thickness
Minimum Pulley Diameter	in.	mm	in.	mm	.059" (1.5 mm)	.078" (2.0 mm)	.098" (2.5 mm)	.118" (3.0 mm)	.138" (3.5 mm)	.197" (5.0 mm)
1.6" (40 mm)	.019	.50	.047	1.20	G005A
1.6" (40 mm)	.029	.75	.055	1.40		G005
2.0" (50 mm)	.019	.50	.047	1.20		G006A
2.0" (50 mm)	.029	.75	.055	1.40			G006
3.0" (75 mm)	.039	1.0	079	2.00				G008